Boxer Van

From 29,925 inc-VAT*




  • /image/78/2/peugeot-boxer-dim-ext-700.93782.jpg


  • /image/78/4/peugeot-boxer-dim-int-700.93784.jpg


  • /image/78/6/peugeot-boxer-charge-utile-700.93786.jpg


  • /image/78/8/peugeot-boxer-volume-utile-700.93788.jpg



With the new Peugeot Boxer, a range is here to suit every of your professional needs*:

  • panel vans, glazed or semi-glazed vans
  • crew cabs with 6/7 seats to carry goods and workers on same time
  • DHL transporation goods till 22 m3 and 4T
  • Iso Van with integreted cell into the Van or assembled on a cab chassis
  • Tow truck
  • Platform cabs, single or double from 3 to 7 seats to carry goods and workers on same tim
  • high-tensile steel tipper with or with removable system with 3.5T payload
  • naked simple or double cab chassis and flatbed for your own local transformations.

All conversion done on the New Peugeot Boxer are made in France with high European quality made and with local manufacturers.

*Special order


Minibuses versions are available for passenger transportation with 18 or 22 seats (included driver and 2 front passengers)*

*Special order



With its Diesel Engine 2.2 l HDi 130 hp, the new Peugeot Boxer delivers 110kW and 350Nm at 1,750rpm and comes with a piston-cooling mode and specific engine mapping. This feature makes it the best belt for both small trips in town and long outings out on the open road.


WLTP Values(1) : WLTP (Worldwide Harmonised Light Vehicle Test Procedure) combined fuel consumption in l/100km ranges TBC.

WLTP combined CO2 emissions (g/km) range TBC.

(1) The fuel consumption and CO2 emissions figures mentioned comply with the WLTP homologation (regulation EU 2017/948). From 1 September 2018, new vehicles are type-approved using the World Harmonised Light Vehicle Test Procedure (WLTP), which is a new, more realistic test procedure for measuring fuel consumption and CO2 emissions. The WLTP fully replaces the New European Drive Cycle (NEDC), which was the test procedure used previously. Due to more realistic test conditions, the fuel consumption and CO2 emissions measured under the WLTP are in many cases higher compared to those measured under the NEDC. The fuel consumption and CO2 emissions figures may vary depending on specific equipment, options and format of tires. Please contact your dealer for more information.

For more information 

NEDC Values(2) :NEDC  combined fuel consumption in l/100km ranges from 6.0 to 6.4.

NEDC combined CO2 emissions (g/km) range from 158 to 168.

(2) The fuel consumption and CO2 emissions figures mentioned are determined according to the new World Harmonised Light Vehicle Test Procedure WLTP (Regulation EU 2017/948), and the relevant values are translated back into NEDC to allow the comparability with other vehicles. Please contact your dealer for the latest information. The values do not take into account in particular use and driving conditions, equipment or options and may vary depending on the format of tires. For more information on official fuel consumption and CO2 emission values, please read the  model specification sheet.

* Estimated data, provided for information only and subject to approval.